Input: 10.1 to 16.9 VDC
Output: timed delayed dropout user selectable times of:
30 seconds
30 minutes
1 hour
3 hours
or any combination of above DIP switch selectable
The GS12-3 timer will terminate the output and sound a built in alarm buzzer if the battery voltage goes above 17 volts or below 10 volts
Electrical Specifications:
Now you can protect your battery and electronic equipment with our GS12-3 Timer module
The timer is triggered by the Ignition switch with built in switching delay and under voltage sense to protect your equipment from low battery voltage while starting.
Built in automotive fuse for protection of your load (Can also be the fuse for your load.)
Built in extra Power terminator terminals so no external splice devices are needed
Switch contact rated at 30 Amps
Standby current:
Less than 6ma
Automotive Delay- Off Timer
Internal circuits are forward and reverse voltage protected up to 30 VDC and spike protected up to 400 VDC. Designed to meet SAE Automotive specifications
LED indicators for status, output voltage confirmation, vehicle Voltage test and timer countdown
Operating Temp Range:
-20 to +80 Deg C
Storage Temp Range:
-30 to +85 Deg C
Limited 1 year Factory Warranty
New lite version
Lower cost.... just no sound alarm